
PROFESSIONAL WINTER OPERATIONS
Commercial Snow Plowing Services
Professional snow plowing for commercial, strata, industrial, and managed properties. We combine the right equipment, site-specific planning, and WIE-powered dispatch to keep properties accessible throughout winter weather.

142+
Trained professionals
_edited.png)
106+
Pieces of equipment
_edited.png)
AB & BC
Regional Service Coverage

Direct crews & supervisors

Fleet & specialized equipment

Fully insured & documented

Smart dispatch & backup coverage
SERVICE DEFINITION
What Is Snow Plowing?
Snow plowing is the mechanical clearing and displacement of accumulated snow from paved outdoor surfaces using plow-equipped vehicles and heavy equipment.
​
For commercial properties, it is used to maintain access across parking lots, drive aisles, private roads, loading areas, and other vehicle routes.
Effective plowing depends on three things:
​
-
Using the right equipment for each area
-
Clearing snow at the right time
-
Placing snow where it will not interfere with property operations

Effective snow plowing is about maintaining property access throughout a winter event—not simply clearing snow after it ends.

EQUIPMENT FOR EVERY PROPERTY
The Equipment We Use for Snow Plowing
Different areas of a property require different equipment. We use multiple truck sizes, plow configurations, and specialized machines so each zone can be serviced efficiently.

F-150 Plow Trucks
Smaller trucks provide better maneuverability in tighter parking areas, narrow drive lanes, and properties where larger equipment is unnecessary.


F-550 & Larger Plow Trucks
Larger trucks provide greater pushing capacity for large parking lots, main traffic routes, long access roads, and heavier snowfall.


Different Plow Sizes & Configurations
Different-sized and shaped plows are used depending on the property and application. The correct blade configuration improves snow movement, maneuverability, and clearing efficiency.


ATV Plows
ATVs provide access to narrow areas and smaller zones where full-size plow trucks are not practical.


Skid Steers
Skid steers are highly maneuverable and useful around curbs, islands, confined parking areas, and areas requiring precise snow movement.


Loaders
Loaders provide high-capacity snow movement for large commercial sites, heavy accumulations, snow stacking, and consolidation.

INTELLIGENCE IN ACTION
How WIE Improves Snow Plowing
Our WIE technology helps turn winter conditions and property information into better dispatch decisions. Instead of treating every snowfall or property the same way, WIE helps determine the resources required for the conditions.
1
Smarter Dispatch
.avif)
WIE helps determine how many units should be sent to a property based on winter conditions and service requirements.
2
Better Equipment Allocation
.avif)
The system supports decisions about what type and quantity of equipment should be deployed.
3
Faster Response
.avif)
Better information allows crews and equipment to be organized more efficiently before and during an event.
4
More Efficient Plowing
.avif)
Better dispatch and equipment allocation reduce unnecessary movement and improve the overall plowing process.
5
Site-Specific Planning
.avif)
Different properties and different areas within a property may require different levels of attention. WIE helps account for those differences.
6
Better Cost Efficiency
.avif)
Dispatching the appropriate number of units helps avoid unnecessary over-deployment while maintaining the required service level.

What Matters Most During Snow Plowing
Good snow plowing is not simply about pushing snow away. Several operational decisions directly affect how well a property functions during and after a storm.

Correct Timing
Service before accumulation becomes difficult.

Maintaining Access
Keep priority routes open throughout storms.

Proper Equipment Selection
Match equipment to each service zone.

Smart Snow Placement
Protect parking, visibility, and drainage.

Multiple Storm Passes
Repeat service as snowfall continues.

Better data. Better dispatch. Faster response. More efficient snow plowing.
A PROVEN PROCESS
How We Ensure Successful Snow Plowing
Successful snow plowing starts before the first truck arrives. We plan the property, monitor conditions, dispatch the right equipment, and adjust service as the storm develops.

1. Review & Plan
We assess the property, access routes, service zones, obstacles, and snow-stacking areas before service begins.

2. Monitor & Prepare
We monitor winter conditions and use WIE data to help determine the equipment and resources required.

3. Dispatch & Plow
We deploy the appropriate units, prioritize key access areas, and maintain property function throughout the storm.

4. Complete & Review
We finish remaining clearing, address accumulation areas, and confirm the property has reached the intended service condition.
Snow plowing pushes accumulated snow away from parking lots, drive aisles, private roads, and other service areas, usually into designated stacking zones on the property. Snow removal goes further by loading and hauling accumulated snow off-site when on-property storage becomes limited or begins interfering with parking, access, visibility, or operations.
Commercial snow plowing typically begins when snowfall reaches the trigger depth defined in the property’s service plan. The appropriate trigger depends on property use, traffic, operating hours, snowfall intensity, and service requirements. Some properties may also require service during an active storm before the final trigger depth is reached.
A parking lot may require multiple plowing passes during longer or heavier snowstorms. Service frequency depends on snowfall rate, total accumulation, traffic levels, priority access routes, and the property’s service requirements. Repeat passes help prevent excessive buildup and keep important vehicle areas accessible while snow continues to fall.
Commercial snow plowing can use pickup trucks, larger plow trucks, ATV plows, skid steers, loaders, and different plow blade configurations. Equipment selection depends on the size, layout, snowfall conditions, maneuverability requirements, and workload of each service area. Larger properties often require several equipment types working together.
Snow plowing, salting, and de-icing are separate winter services that are often coordinated together. Plowing mechanically removes accumulated snow, while salting and de-icing help manage slippery or icy surface conditions. A property may require one or several of these services depending on weather, surface conditions, and its winter maintenance plan.
Plowed snow is normally pushed into predetermined stacking areas on the property. These locations should preserve parking capacity, vehicle circulation, sightlines, drainage, entrances, and loading areas. When snow piles become too large or suitable storage space is no longer available, snow can be loaded and hauled off-site.
Commercial snow plowing costs depend on the size of the serviceable area, property layout, snowfall requirements, trigger depth, equipment needs, service frequency, and contract structure. Large or complex sites may require multiple trucks or machines. A property-specific assessment provides a more accurate price than applying a standard rate to every site.
Snow plowing can damage property features if equipment is used improperly or site hazards are not clearly identified. Pre-season planning, appropriate equipment, known curb and island locations, trained operators, and documented property information help reduce the risk of damage to pavement edges, curbs, landscaping, signs, and other site features.
Commercial snow plowing can cover parking lots, drive aisles, private roads, loading areas, fire routes, access lanes, entrances, and other vehicle surfaces. Each area may require different equipment or service priorities depending on its width, traffic level, accessibility, obstacles, and importance to the operation of the property.
A commercial snow plowing plan should define service areas, priority routes, snowfall triggers, equipment requirements, snow-stacking locations, repeat-pass expectations, access priorities, and related ice-management needs. It should also account for how the property operates during winter so crews can respond efficiently as conditions change.

READY FOR A SAFER WINTER?
Get a Quote for Snow Plowing
Tell us about your property and service requirements. We will review the site and develop a snow-plowing approach suited to the property's size, layout, and winter-service needs.

Local crews & equipment​

WIE™ monitoring & Spot Salting™

Proof of service & billing transparency

Coverage across Alberta & British Columbia


Smarter & Safer Winter Service.
WINTER INTELLIGENCE ENGINE™
Property-specific monitoring, predictive ice intelligence and smarter winter operations.
GET IN TOUCH
Lower Mainland & Fraser Valley, BC
Alberta
GET THE WIE APP

Live conditions. Smarter decisions. Safer communities.




















